> PUMPS & FILTER SYSTEMS > Sand Filtration System

Sand Filtration Systems
The Polygroup Sand Filtration systems are compatible with most pools.
There are two options for connecting the sand filter: It can be hooked up directly to any liners that have 2 small round openings on the side of the pool for suction and return fittings, or it can be connected to the bases of the SFS and SFX canister filtration systems.

**********Please select the Complete filtration system size below to read about and order compatible Sand Filtration parts for these systems.**********

Sort By:
1
1.25" to 1.50" Connection Adapter

Plastic Adapter designed to increase connection size from 1.25" to 1.50". Made out of soft rubber.

This adapter is used for :

  • Summer Waves Solar Heat Mat
  • Summer Waves Sand Filtration Systems
  • Any Polygroup hose 1.25" connection that needs to be adapted to 1.50"
Previously Under Part Number: PF5620

Our Price: $6.49
In Stock
Deluxe Maintenance Kit

The Deluxe Maintenance Kit is designed to be used to keep your pool water clean and sanitary.

This Deluxe kit is a multi-tasker and can be used for Skimmer Filtration Systems (RS, SFS, SFX) by attaching the vacuum adapter and using the filtration system directly.
It can also be used for other systems as the multi function vacuum head can be paired with the vacuum sock and a garden hose so this kit can be used for the RP, RX, CP2000-C or our Sand Filtration systems.

Previously Under Part Number: 097-040039

Maintenance kits do not carry a warranty; please contact our customer service center if you have any problems with your item within 7 days of purchase.

Deluxe Maintenance Kit Manual PDF download link


Our Price: $57.49
In Stock
(2)
Pool Vacuum Kit

Venturi type pool vacuum maintenance kit that attaches to a standard garden hose and cleans small grass clippings and dirt from the bottom of the pool into a mesh bag.

Includes:

  • 3 Piece Pole
  • Round Vacuum head Part # P5B00043A099
  • Mesh Vacuum Bag Part # P5BA000001W1
Previously Under Part Number: M-P51-0043

Maintenance kits do not carry a warranty; please contact our customer service center if you have any problems with your item within 7 days of purchase.

Our Price: $29.99
In Stock
Standard Maintenance Kit

The Standard Maintenance Kit includes everything needed to vacuum your pool using your own standard garden hose.

This kit was designed to be used with all sizes of RP, RX, CP2000-C, and both Sand filtration systems where you cannot connect a regular vacuum to the filtration suction side.

Standard Maintenance Kit includes the following items:

  • Square vacuum head
  • Reusable Vacuum Debris bag
  • Telescoping pole
  • Durable mesh skimmer net

The Standard maintenance kit requires the use of a standard garden hose and the debris is collected in the white debris sock attached to the vacuum head.

Standard Garden hose not included.

Maintenance kits do not carry a warranty; please contact our customer service center if you have any problems with your item within 7 days of purchase.

Previously Under Part Number: 096-050024

Our Price: $42.99
In Stock
Summer Waves 10" Sand Filtration System

Summer Waves 10" Sand Filtration System Number ST1100. This Sand filtration system includes the sand tank, holder, pump, hoses, and all 1.50" suction and return fittings.

This sand filter pump will connect to all pools that have TWO small round holes in the liner for suction and return fittings.

  • Sand not included , use only with number 20 Silica Sand.
  • This unit has 1.50" connections - please order the separate adapter if your system uses 1.25" connections.
  • The flow rate of our 10" Sand Filter Pump is 1400GPH, so it can be used on a pool up to 13,000 Gallon Capacity

Note: This filter system will need to be assembled.

  • 180 day limited warranty
  • Signature required upon delivery

  • Our Price: $255.99
    In Stock
    Summer Waves 12" Sand Filtration System

    Summer Waves 12" Sand Filtration System Number ST1600. This Sand filtration system includes the sand tank, holder, pump, hoses, and all 1.50" suction and return fittings.

    This sand filter pump will connect to all pools that have TWO small round holes in the liner for suction and return fittings.

    • Sand not included , use only with number 20 Silica Sand
    • This unit has 1.50" connections- Please order the separate adapters if your system uses 1.25" connections
    • The flow rate of our 12" Sand Filter Pump is 1600GPH, so it can be used on a pool up to 16,000 Gallon Capacity
    Previously Under Part Number: P53ST1600099

    Note: This filter system will need to be assembled.
    • 180 day limited warranty
    • Signature required upon delivery

    Our Price: $273.99
    In Stock
    (3)
    Summer Waves Maintenance Kit

    The Summer Waves Maintenance Kit includes everything needed to vacuum your pool using your own standard garden hose.

    This kit was designed to be used with all sizes of RP, RX, CP2000-C, and both Sand filtration systems where you cannot connect a regular vacuum to the filtration suction side.

    This Maintenance Kit includes the following items:

    • Square vacuum head
    • Reusable Vacuum Debris bag
    • 3-Piece pole
    • Durable mesh skimmer net

    This maintenance kit requires the use of a standard garden hose and the debris is collected in the white debris sock attached to the vacuum head.

    Standard Garden hose not included.

    Maintenance kits do not carry a warranty; please contact our customer service center if you have any problems with your item within 7 days of purchase.

    Our Price: $42.99
    In Stock
       
     
    1