Vinyl Repair Kit
vinyl repair kit


 
Price: $25.99

Stock Status:In Stock

Product Code: P5E35245AW01
Qty:

Description Assembly and Troubleshooting
 
A complete vinyl repair kit to repair large seam rips, holes, and tears in pool liners.
The kit can be used to mend and repair pools filled with water, so there is no need to drain your pool.

The kit contains:
  • 4 to 5 Clear Vinyl patches (6" x 23" ) approximately 500 square inches.
  • 4 ounces vinyl adhesive with dauber application cap
Part #: JED #35-245

We also carry different styles of patches, please see related products.
Additional Information
  • Inflatables: Apply solution to the patch sparingly, press the patch tightly to surface to be repaired. Allow to sit overnight before inflating.
  • NON - Inflatable : Note the area to be patched, make sure the size of the patch covers the seam/rip/tear completely. (You may need to cut patch to size) You can use tape to hold the patch in place. Apply adhesive sparingly on the patch reverse side (towards the pool liner) and press firmly. When the repair is dry you can remove the tape that was holding the patch in place.
  • Repairing Under water: Clean area around the hole with a cloth. Apply adhesive to the patch sparingly. Press the patch against the hole making sure to push any water between the patch and the liner out for a good seal.
Note- These patches are boxed with tissue between each vinyl patch so they do not stick to each other.

Related Products
2.75" x 2.75" Repair Patches for Inflatables & Family Pools 4" X 4" Repair Patches for Pools (Bag of 2) Underwater Peel & Stick Vinyl Pool Patches (Pack of 10)
Price: $2.50

Add
Price: $2.50

Add
Price: $9.99

Add
pool repair patches 4" X 4" Repair Patches for Pools (Bag of 2) Underwater Peel & Stick Vinyl Pool Patches

Share your knowledge of this product. Be the first to write a review »